Automatic alloy and auxiliary material addition system at the rear of the furnace (one-to-many)

Post-Furnace Alloy and Additive Automatic Dosing System (One-to-Many):

This system is designed for large quantities of alloy (single type over 50kg, multiple types totaling over 200kg) and can accommodate 4-8 types of alloy and additives. There are specific requirements for alloy particle size: an average of less than 30mm is optimal (maximum 50mm).

Furnace Platform Alloy and Additive Automatic Dosing System (One-to-Two):

Targeting a relatively high usage of alloy (single type over 20kg, multiple types totaling over 100kg), this automatic dosing system is configured between two electric furnaces and can accommodate 2-6 types of alloy and additives. The alloy particle size should average less than 30mm for optimal performance (maximum 50mm).

Furnace Platform Alloy and Additive Semi-Automatic Precision Dosing:

This setup is for various low-usage alloys (single type within 20kg, total within 100kg) and situations requiring precision dosing and conditioning, mounted on the furnace platform, allowing dosing of 4-6 types. There are specific requirements for alloy particle size: an average of less than 15mm is optimal (maximum 30mm). For precious metals, a surveillance camera can be installed for real-time monitoring and anti-theft purposes.

Furnace Platform Manual Precision Dosing for Alloys:

This is intended for low usage of multiple alloys (single type within 10kg, total within 50kg) and situations requiring precision dosing, mounted on the furnace platform, allowing for various alloys and additives. Requirements for alloy particle size include an average of less than 15mm for optimal performance (maximum 30mm). A surveillance camera can also be installed for precious metals for real-time monitoring.